Have you lost your nuts? We’ve got you covered.
We have spares available for BOSE jacks, sometimes referred to as LEMO jacks.
Bose jack sold separately.
Have you lost your nuts? We’ve got you covered.
We have spares available for BOSE jacks, sometimes referred to as LEMO jacks.
Bose jack sold separately.
Dual USB Type A and Type C Charger.
Input 12v
Output 3.8A
Connector and contacts included.
We recommend using the SAT-018 Molex crimper to crimp these small pins.
Molex Pinout diagram:
In just a few short years, battery-powered mobile devices have become essential in-flight tools for pilots and their passengers alike. Pilots use their tablets or smartphones to access flight plans, moving maps, charts, weather data, manuals and more — while passengers access entertainment, messaging and all types of productivity apps on their devices. But, invariably, all these portable electronics need an external power source to keep them charged and ready to use over a long flight. That’s where our GSB 15 USB charging hub makes all the difference.
The dual-port GSB 15 offers multiple charging options. The dual USB Type-A GSB 15 charging hub features Qualcomm® Quick Charge™ technology and can deliver up to 18 watts of power to each USB port simultaneously. If you have a newer portable device, including iPad Pro tablets from 2018 or later, the GSB 15 dual USB Type-C version offers up to 27 watts — enough to power two tablets or similar smart devices while also charging their batteries1. It also includes USB Power Delivery technology to provide optimal charging to every connected device. You can even choose a version that offers one of each type connector for maximum flexibility. With any option, there’s built-in protection against circuit and temperature overloads. Plus, configurable halo lighting on the plugs makes them easy to locate and access in a darkened cabin or cockpit — and the dual USB Type-C and USB Type-A/Type-C versions even have dimmable lighting.
All slimline GSB 15 charging hubs measure just over 1.5” square and stand less than an inch deep — making them among the smallest dual-port USB charging hubs ever designed for aviation use. They come in two formats: one designed to be wired into aircraft power from the back of the unit — and one that connects to aircraft power through the side (bottom) of the case. Choose the version that fits best with your application and its related space constraints.
If your aircraft is equipped with a GI 275 Flight Instrument you will also appreciate GSB 15 for its data transfer capabilities. Using a USB flash drive and the GSB 15, you can transfer databases to a GI 275 flight instrument. Databases will then also be synced among multiple GI 275 flight instruments in a single cockpit. In addition to database updating, GSB 15 can also be used to save flight logs — including engine data2 — from the GI 275 to a USB flash drive.
You can mount GSB 15 virtually anywhere. It’s small enough to fit a 1” cutout — and it’s available with an optional 1” Black powder coat decorative cover or mounting plates that allow for easy installation in existing, unused 2.25” or 3.125” instrument holes in the panel. And all GSB 15 models use the same power input connector, so the USB Type-C equipped versions can be an easy upgrade from an existing dual Type-A installation3. GSB 15 has FAA TSO and, consequently, European approval. The device will fit in a variety of constricted spaces — such as aircraft sidewalls, armrests or aft console positions — where most aviation USB chargers are simply too large or unwieldy to install.
To purchase a Garmin GSB-15
Contact us @ 651-460-6955
Sales@steinair.com
This device can be utilized in scenarios demanding continuous operation, such as serving as a battery master contactor, ground power contactor, alternator disconnect contactor, or hydraulic landing gear system contactor. It comes equipped with a spike suppression diode and pre-installed battery terminal jumper. The coil has a resistance of 15 ohms, and it weighs 13 ounces. Terminal connections are compatible with .31 and #10 ring terminals. Designed for use with 12V electrical systems.
Suitable for applications necessitating continuous-duty operation such as battery master contactor, ground power contactor, alternator disconnect contactor, or hydraulic landing gear system contactor. This model is also suitable as the cross-feed contactor in dual alternator systems. Comes equipped with a spike suppression diode and pre-installed battery terminal jumper. The coil resistance measures 15 ohms, and the contactor weighs 13 ounces. Terminal connections utilize .31 and #10 ring terminals. Designed for compatibility with 12V electrical systems.
Designed as an intermittent-duty device suitable for initiating contact, this product incorporates an internal spike suppression diode. It has the capacity to illuminate a ‘Starter Engaged’ indicator on the instrument panel. Equipped with a robust electro-magnet, it ensures reliable operation without sticking. Power is supplied to the contactor’s coil through the ‘S’ terminal (10-32 thread), with grounding facilitated by the mounting base. In instances where mounting occurs on a non-grounded surface, it is recommended to include a 20 AWG jumper from the base mounting screw to the firewall ground. The coil exhibits a resistance of 2.5 ohms, and the unit weighs 10 ounces. Designed for compatibility with 12V electrical systems
12V defrost fan or cooling fan.
Measures 3.25″ x 3.25″ x 1″
Aluminum fan cover is also available. see DEFROST-FAN-COVER
Aithre® Shield EX 3.0, Carbon Monoxide Detector (Remote)
Experimental Aircraft Only: The Aithre Shield EX 3.0 is the first behind-the-panel device that puts carbon monoxide readings, pilot SPO2 from your Aithre Illyrian, and portable oxygen bottle PSI from your Aithre Altus Meso directly on your Dynon SkyView and Garmin G3X.
Features simple wiring installation, a small lightweight footprint, iOS integration, and 10 years without recalibration for the CO ppm.
GMA Audio Panel Backplate Assembly.
Includes backplate and mounting screws.
Garmin part number: 011-00678-00
GMA-mounting rack is sold separately.
GMA-connector kit is sold separately.