Description
Aviation crimp tool is compatible with the M22520/2-01 which is widely used for the crimping of wires and contacts in electronic connectors.
4 indent 8 impression; gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength.
Professional crimping tool. Designed according to MIL-C-22520/2-01;The cycle controlled precision ratchet assures consistently accurate crimps every time; Designed for most of the miniature and sub-miniature connector types that are so widely used in electronic systems; Suitable for crimping round contacts of MIL standard, Harting, Wain, TE connectors
The K13-1 positioner is designed according to MIL-C-22520/2-08. It can be installed directly on the crimping tool and requires no adjustment. It is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp position.1) Used for crimping the 20# pin and socket of the MIL-PRF-38999 series connectors. Suitable terminal model: M39029/11-145,M39029/12-149; 2) Used for crimping the 20# pin and socket of the MIL-DTL-24308 series connectors. Suitable terminal model: M39029/63-356,M39029/64-357,M39029/63-368,M39029/64-369;3) Used for crimping the 20# pin and socket of the MIL-DTL-83527 series connectors. Suitable terminal model: M39029/94-602,M39029/93-598
The K40 positioner is designed according to MIL-C-22520/2-07. Used for crimping the 22#, 22M#, 22D# sockets of the MIL-PRF-38999 series connectors. Suitable terminal model: M39029/56-350,M39029/56-349,M39029/56-348.
The K42 positioner is designed according to MIL-C-22520/2-09. 1)Used for crimping the 22# pin and socket of the MIL-DTL-24308 series connectors. Suitable terminal model: M39029/58-360;2) Used for crimping the 22# ,22M#, 22D# pin of the MIL-DTL-24308 series connectors. Suitable terminal model: M39029/58-362,M39029/58-361,M39029/58-360
The K43 positioner is designed according to MIL-C-22520/2-10. Used for crimping the 20# pin and socket of the MIL-PRF-38999 series connectors. Suitable terminal model: M39029/58-363,M39029/56-351.
The K41 positioner is designed according to MIL-C-22520/2-06. 1)Used for crimping the 22# pin and socket of the MIL-DTL-24308 series connectors. Suitable terminal model: M39029/57-354; 2)Used for crimping the 22#, 22M#, 22D# socket of the MIL-PRF-38999 series connectors. Suitable terminal model: M39029/57-356,M39029/57-355,M39029/57-354; 3)Used for crimping the 22D# pin and socket of the MIL-DTL-83733 series connectors. Suitable terminal model: M39029/58-360
The K1 positioner 1) Used for crimping the 20# pin and socket of the MIL-DTL-83723 series connectors. Suitable terminal model: M39029/4-110,M39029/5-115; 2)Used for crimping the 20# pin and socket of the MIL-C-81703 series 3 connectors. Suitable terminal model: M39029/4-112,M39029/5-117,M39029/4-110,M39029/5-115; 3)Used for crimping the 20# pin and socket of the MIL-C-81703 series 2 connectors. Suitable terminal model: M39029/31-223,M39029/32-247; 4)Used for crimping the 20# pin and socket of the MIL-DTL-26482 series 1 connectors. Suitable terminal model: M39029/32-259,M39029/31-240; 5)Used for crimping the 20# pin and socket of the MIL-DTL-26482 series 2 connectors. Suitable terminal model: M39029/4-110,M39029/5-115; 6)Used for crimping the 20# pin and socket of the MIL-DTL-26500 series connectors. Suitable terminal model: M39029/32-260,M39029/31-241; 7)Used for crimping the 20# pin and socket of the MIL-DTL-38300 series connectors. Suitable terminal model: M39029/31-241,M39029/32-260; 8)Used for crimping the 20# pin and socket of the MIL-DTL-83733 series connectors. Suitable terminal model: M39029/4-110,M39029/5-115.
The K709 positioner is designed according to MIL-C-22520/2-37. Used for crimping Data Bus (CONCENTRIC TWINAX) contacts. Suitable terminal model: M39029/113-625**,M39029/114-628***.
G125 Go-NoGo gage
G125 is designed according to MIL-C-M22520/3-1. Each crimp tool has accurate indenter working diameter. The gage is necessary to ensure the crimp tool is in proper working status before using or after being used for a certain period of time.Indenter Working Dia (in/mm):
GO:0.0390 (0.99) – NO-GO:0.0440 (1.12)
1.Operate the tool to the fully closed working position. Set the crimp tool to the correct selector number.
2.If the “GO” gage end (Green) can pass freely, but the NO-GO end (Red) can not pass completely, it means the tool is still qualified.
3.If the “GO” gage end (Green) can not pass, but the NO-GO end (Red) can pass completely, it means the tool is not qualified
Features
1. Material of Mould Steel (Good Durability & Good Anti-deformation & Good appearance & Anti-rust)
2. Four-indent Crimp Tool(Crimp tension is 1.3 times that of the hexagonal crimp, more stable & more reliable)
3.8 Selector Numbers(Adjustable crimping ranges in different selector number, more convenient for wider applications)
Crimp Principal
The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.
Installation of Positioners
1. Before installing the locator, the tool should be open.
2. Remove the safety clip from positioner guide.
3. Insert the positioner into positioner guide, push down and then rotate 90 °, until bayonet pins lock.
4. Remove the spring clip from the selector knob, adjust it to the correct selector position.
Applications
![]() MIL 22# Contacts |
![]() MIL 20# Contacts |
Crimping Instructions
![]() Step 1 : Put the contact |
![]() Step 2 : Insert the wire |
![]() |
![]() Step 4 : Remove the crimped contact |