SteinAir.com

The Pro Pilot is a two axis autopilot designed for precise navigation and altitude control.  It encompasses all of the performance and safety features of our other systems, and makes them available in a single, panel mounted instrument.  The system includes back-lighted buttons and illuminated faceplate nomenclature as part of a pleasing new industrial design.

The Pro Pilot provides excellent horizontal navigation capabilities and the vertical navigation provides altitude control, climb/descent functions with airspeed limiting, and altitude pre-select.  Climb/descent on airspeed is also included.

EZ Pilot is a modern solid-state navigation system designed to accurately track a GPS flight plan or "Go To" Course that is entered into a handheld or panel mount GPS Receiver.  It also acts as a basic wing leveler when no GPS is available.

The pilot simply enters a flight plan into the GPS and presses the Servo button.  The EZ Pilot then precisely tracks the flight plan.

If the pilot wishes to deviate from the programmed flight path, the Mode button is pressed to enter the Course mode and track any bearing selected with the "L-R" switch.  The new bearing will display on the readout and the aircraft will track that bearing.

The GX PRO has all of the features of the standard Pro Pilot autopilot with the additional capability of bi-directional communications with the Garmin G3X EFIS system.  The
GX PRO flight dynamics have been optimized to take full advantage of the G3X pitch and roll guidance.

When matched with a Garmin G3X, the GX PRO does not require the Pro Pilot ARINC 429 circuitry normally needed to interface with other EFIS systems.  This results in a significant cost savings, yet adds full horizontal (GPSS) and vertical (GPSV) control via serial commands from the G3X.