|
RV-10 Carbon Fiber Modular Panel.
Modular Panel for RV-10. This is a drop in replacement
for the RV-10 and is produced from extremely high quality aerospace
grade "Pre-Preg" Carbon Fiber Cloth that is vacuum bagged and cured in
an autoclave. This is hands down the highest quality composite panel
we've seen available for the RV-10 and the first one that we consider
good enough to sell! You may purchase components separately if desire.
Also note that the panel as delivered to you will not have any material
cutout of the center section so you can mount equipment as desired.The panel consists of the following components:
Main Panel: $650
Aluminum Inserts/Plates for Panel: $100
Center Console with side plates: $500
Total Package: $1250
|
| |
|
Modular RV-10 Panel, .090" Aluminum that is will drop
in place of the standard Van's Panel.
Modular Panel for the RV-10. This is a ACCURATE HOLE FOR HOLE
replacement of the standard Van's panel, but is MUCH more functional.
Center stack is available in either canted or straight. This panel
is approximately 1.5" taller than the standard Van's panel, and allows
for "stacked Cheltons or GRT's", as well as eliminating that pesky row
of nutplates! Pricing is $699!
|
| |
|
RV-10 OVERHEAD CONSOLES |
|
 
RV10-OVHCONSOLE |
RV-10 Overhead Console. NOTE: There are three ways to purchase this
console:
1) Console Only: $625 - Available for Online Purchase
- Call or Email for ordering packages below -
2) Console + 4 Vents (Black or Silver) + 4 Single Bulb Eyeball Lights:
$1100
3) Console + 4 Vents (Black or Silver) + 4 Maplight 4 bult LED swivel
Lights: $1200 |
|
| |
|
CUSTOM METAL PANELS & METAL PANEL
MODIFICATION
SteinAir, Inc. has the capability to create whatever
modifications you need to your panel. With our in house CNC
capabilities as well as access to an expert aluminum welder, the
possibilities are endless. Below are a few pics of modified panels
done with customized metal work in aluminum. You imagine it, we
build it! |
RV-10 Custom lower Backup Instrument Cluster. |
Detail of custom flange. |
RV-7 Custom lowered flange on G-900X panel.
RV-7 Lowered center flange. |
Custom Lowered F-1 Rocket Panel. |
| |
|
RV-10 PANELS |
| |
|
|
Mark M. RV-10. Custom Modular metal panel.
G900X, full backup instruments. |
Leo Davies RV-10 in Australia! |
|
Joe and Bill Z's RV-10 with G900X, Dynon EFIS and Sorcerer A/P. |
Robert and Steve Tschurwald RV-10 with G900X.
Pedestal custom fit with Quadrant.
Note: Pedestals are available and fit directly on the
RV-10 Tunnel. |
|
Ted Lockhard RV-10 G900X panel.
Sorcerer, GPS-496 and ADI. |
Gary Specketer's new RV-10 Panel with G900X installed.
Replaced previous OP Technologies System installation. |
|
RV-10 with G900X. |
The "South Dakota Boys' " RV-10 with G900X and Dynon EFIS. |
RV-10 Panel Pic (Cropped) with G900X. |
Team RV-10 G900X Panel. Custom flush map box doors.
TruTrak Sorcerer, 496 and FMS Keypad.
|
|
Eric Kallio RV-10
Dual GRT HX EFIS
Full Garmin Stack. |
Larry B. RV-10 Fiberglass Modular Panel. AFS Screens, custom paint
with gold foil labeling. |
Rick Barnes/Mike Howe RV-10.
Triple Screen AFS EFIS.
Custom Pedestal. |
RV-10 G900X panel. |
|
Lyle Bender's RV-10 Panel.
Dual Screen Advanced Flight, GNS530, Sorcerer. |
RV-10 Panel with Dual AFS EFIS's and full Garmin Stack. |
Dubs RV-10. Dual Screen GRT HX EFIS system, Trutrak AP and Garmin
Avionics. |
Terry B. RV-10.
Dual Screen Chelton
Complete Garmin Stack. |
|
John Ackerman's RV-10 Panel Almost Done!
Dual Chelton EFISes, AF-3500 Engin/EFIS combo - Full Garmin Stack.
|
Jim Berry RV-10.
Dual Cheltons with AFS EFIS. |
Wayne Edgerton RV-10
Dual Chelton, MVP-50, TAS600, Oxygen,
Weather, Traffic. |
Doug Preston RV-10. Single Screen Chelton
interfaced with Advaced Flight AFS "AF-3500" EFIS / Engine Monitor
Combination. Modular RV-10 Panel. |
|
Barry Marz RV-10. Dual Screen GRT. TruTrak AP and GNC-300XL GPS. |
Bob MacIntyre RV-10
Dual GRT "High Resolution". |
Rene Felker RV-10. Dual GRT, Blue Mountian, 3 Scren DVD. |
Tim Olson's
RV-10 panel with 3 Chelton EFIS Screens. Owner Tim
Olson. |
|
Gary Foster RV-10 Panel in progress.
3 Screen Dual AHRS GRT EFIS. Custom Modular Metal Panel. |
Jim Sinkbeil/Jim Otey RV-10
Dual Cheltons, EI-MVP50
Fiberglass panel with textured finish. |
Dr.Peeler RV-10. G900X! |
David Jones RV-10 Panel in progress
(with our shop watchdog)! 3 Screen Dual AHRS GRT EFIS with Traffic & XM
Weather. Standard Vans Panel. |
Scott Keadle RV-10
Dual Cheltons |
Gray Bridwell RV-10.
3 Screen
Dual AHRS GRT EFIS system. Custom Cut Metal Panel. |
Russ's RV-10 Panel. Dual GRT EFIS + GRT
Sport + GTX-330 + PMA-8000"SR"! |
Gary Specketer OP-Technologies RV-10 Panel. |
|
Dan Lloyd RV-10.
Dual Screen Chelton,
Dynon D-10A Backup EFIS, Dual SL-30's and 496 GPS.
Sadly Dan has Gone West. |
Brian Bollaert RV-10 Panel
Dual Screen Chelton, Very Reasonable and VERY affordable panel! Sadly,
Brian has Gone West. |
Bob Thompson RV-10.
Single AF-3500EE
Canted Center Stack.
Sadly, Bob has Gone West. |
|
|
RV-8, RV-4 and Rocket Panels |
|
David Read RV-8.
Advanced Flight EFIS
Garmin 696, 430W, etc.. |
Bill Dicus RV-8 Panel.
Satin Black with Silver Foil Lettering! Custom
removable circuit breaker panel. Advanced Flight EFIS/Engine
Monitor, Dynon EFIS, GNS 430 and TruTrak Digiflight IIVSGV. |
 
George Fisher F-1 Rocket.
Dual Chelton, Dynon 10A backup. Note: Custom Metal Panel to
allow for Dual Cheltons in the F-1! |
RV-8 Panel in progress.
AFS AF-4500 and 696. |
|
Jerry Fareell RV-8 |
David Stone RV-8.
Blue Mountain Sport, Dynon 10A, Garmin 496, SL-30, SL-40, PMA9000EX and
GTX327. |
Chuck Wallace RV8 Panel. GRT EFIS,
Custom Carbon Fiber Overlay, Lighted engraved rocker swoitches, |
"Dr.Don" MacNamara RV8 Panel.
Dual Dynon. Note: F-16 custom wired Throttle & Stick Grip! |
Richard White RV-8 |
RV-8 Dual Chelton.
Gus/Mike Olson - Flying! |
Danny Melnik
F-1 Rocket Panel with Dynons and Panel Mounted 396! |
Craig Gallenbach RV-8
Dual Dynon |
Cal Brubaker F1 Rocket Panel
Now Flying! |
Greg Schultz
Rebuild of an old RV4 panel. New GRT
EFIS, New Autopilot, New Switch Panel, etc. |
 |
QUENT GERLACH RV8 |
Stephen Grace RV-8 Panel, GNS-530, Dual
Dynon, TruTrak, GDL WX Receiver and Satellite "SR" audio panel! Excuse
all the finger prints :) - We couldn't resist playing with this one. |
. |
Colin Jordan RV-8 Single Chelton Panel. |
|
|
RV-6, RV-7 and RV-9 Panels |
RV-7 G900X. Fred Shiple. |
R&R Peters RV-7 with Vertical Power Systems. |
Ron M. RV7. Dual Screen AFS EFIS. |
Bob Nelson RV-7
Dual Screen AFS, GNS480 & Remote Transponder. |
Doug Kaye RV-6 Panel |
Henry H RV7
Dual Advanced Flight EFIS. |
Lynn Vaughan RV-7.
Dual Screen Cheltons and MVP! |
Robert Zammit, RV7 Australia.
Dual Screen AFS EFIS (AF-3500). |
Alex D.
RV7. Dual AFS + TruTrak EFISAP. |
Paul Story RV-7A
Dual AFS EFISes. |
Joel Werier RV-7.
Dual AFS with Dual AHRS. |
 .
RV-7 Panel with Dual AFS.
AF-3500 and AF-3400 |
Jason Rouault RV7 Panel. |
Mike C.RV7 Installed.
2nd AF-3400 Added. |
Mike Parker with Dual Dynons. |
Mike C. RV7.
AFS EFIS + Vertical Power VP200 System. |
Jeremy Constant RV-7. GRT EFIS |
Dave Cudney,
RV-7 Panel.
Nice Solid IFR Setup. |
Mike Regen RV7.
Dual Screen GRT, full Garmin stack. |
B Moore AFS Panel |
Tracy Landrum
Dual Dynon, SL-30, TruTrak |
W.Owens Dual AFS Panel. |
Bruce F RV7 Panel.
Modular. Customer kept panel frame, we wired up the
plates. |
 |
Mike Regen, RV7A
GRT EFIS. |
Ben Rooke RV-9A. Dual Screen GRT
EFIS's. Yes....it's "Hummer Yellow"! |
 |
RV-6 with Skyforce, Narco MK12D+, GTX-327, Full Gyros, IDME891, IK-2000. |
 |
Patrick Halama RV-9A Panel nearing completion. BMA EFIs, GNS-530 &
AF-2500 Engine Monitor with Mahogonay Overlays. |
Gene Porter RV7.
Dual Screen GRT. Eggenfellner Engine with EXP buss, custom controller,
etc.. |
More shots of RV-6 Panel. |
Loaner/Rental Panel |
Mike Hays
RV-6 Panel - NICE! |
Mike Hays RV-6 panel, notice the DUAL ADI's and
custom switch guards. |
 |
Note the eyeball vents. They are actually 24K Gold plated NEW
surplus form a biz jet! |
Keith Hamilton Dual Screen GRT. |
VFR RV-7 1/2006 |
|
|
MISC Panels |
Rex Ott Sportsman
(In Progress)Dual Advanced Flight |
Dual screen GRT.
Cozy MK-IV. |
Wayne & Sara
Sportsman.
AFS and Garmin. |
Keith Hallsten Velocity. Dual Screen GRT. |
Bill Browns Arion Lightning
Dual GRT sports. In progress. |
Glastar Panel. |
Tom P Murphy Moose Panel. |
Keith Meinhardt Murphy Moose.
Blue Mountain EFIS Sport, IK Technologies, Garmin,
Montana Floats Control, Soviet Clock! |
CT"SW" LSA Panel. We upgraded this factory new LSAS with the panel
above. Note the D-100, picture taken in direct sunlight. |
We can do a lot with your LSA! Dynon EFIS, PS Engineering Intercom,
Garmin Radio/Transponder & AvMap GPS. |
Side view of celerity panel showing the canted and integral console. |
Jay Sabot Lancair Legacy Panel. Dual
Chelton EFIS, MVP-50 Engine Monitor, Lighted Switches. |
Back Side / Wiring of Gary Rene's Panel.
Note: Color Coded wiring. We
are the only shop that uses color coded wiring as standard (I.E., Red
for Power, Black for Ground, Yellow for Lighting, etc..). |
Berkut Panel. Physical panel construction by Berkut
Engineering, Wiring, Avionics and Electronics by SteinAir! |
 |
 
Gary Rene Celerity Panel (similar to RV6 but constructed of wood). Dynon
D-100, SL-40, GTX-327 and Van's Engine Gauges.
Celerity #2. Note; we cut this panel from on large
chunk of piece of 1/8" Aluminum and then bent/canted the console per the
customer. |
| |
P(S)-51 Panel going together.
|
Zenith
After Paint & Assembly |
Tony Partain Kitfox.
Dynon D-180 |
Doug Reeves
"Scooter Pink" panel. |
Slepcev Storch, metallic Brown Flake. NEAT Airplane! |
 |
Stinson 108 panel modified to be larger per customer requirement &
drawings. |
| |
|
|
|
"Stuff". |
|
Rear of a G900X panel in progress showing wires being bundled/combed.
Again, everything is hand laced! |
Another shot of a G900X panel showing a long
row of breakers and their associated busses. |
More G900X wiring in progress. Hand
laced bundles and Honeywell AML switch wiring. |
Some of our wire storage. Doesn't look
like a lot until you realize those racks are 8 FEET tall! |
|
Rear of an RV-8 panel wired by
SteinAir. Dual Dynon EFISes! |
Back of an RV-8 Panel.
Dual GRT EFISes. |
Back of RV-10 Panel.
OP Technologies EFISes. |
|
|
Typical Wiring of Lighted Rocker Switches. Also, note Hand Tied Wiring lacing is
standard on our panels. |
Kind of a dumb pic, but people always ask
how we ship the panels. We build a wood crate for it then use
expanding foam to really make sure it survives the trip! |
Some of the tools we use while building your panel. We use METCAL
brand soldering stations, STEINEL Digitally controlled heat guns, Fluke
Multi-meters, Daniels Crimpers, etc.. All TOP of the line tooling!
Insist on the best! |
One of our "community" Avionics tool boxes. We have several of
these identical boxes to store many items in our shop! These are not
cheap, but high quality professional Stainless Steel boxes. |
|
Our automatic wire cutting and stripping
machine. This thing will cut and strip wire at thousands of feet
per hour!
|
196 Bracket - Rear. |
Bracket w/ 196 |
Bracket in Panel |
|
196 In Panel w Dynon. |
Flush Map Box Door |
Map Door Open |
More Map Box Door |
|
Door Side Shot |
Think your wiring project is a nightmare?!?!? |
Another shot of a recent project. These are actually multiple engine
monitor harnesses for a mfgr. Note: over 30 different colors &
striped color combinations! |
|
